Pinguino Pac N120e Manual

1. Pinguino Pac N120e Manual Download

OperationTURNING THE APPLIANCE ONPlug the appliance into the socket. Two lines appear on the display indicating that the appliance is in standby. You can con- trol the appliance with the remote control (see page 11) or with the control panel.OPERATION WITH CONTROL PANELPress the ON/STAND BY button ( A).

Pinguino Pac N120e Manual Download

When turned on, the air conditio- ning unit starts operating in the same mode as when it was turned off. Press the MODE button ( B) until the indicator light corresponding to the required mode lights up:Indicator light ( C): air-conditioning modeIndicator light ( D): dehumidifying modeIndicator light ( E): fan mode with air filtrationIndicator light ( C-D-E) together: smart modeAfter selection, the flaps open at a preset angle. When the air conditioner is turned off, the flaps will close.AIR-CONDITIONING MODEIdeal for hot humid weather when you need to cool and dehu- midify the room. To set the operation of the appliance correctly, press the “ +“ ( G) or “ -“ ( P) buttons until the desired temperature is displayed.Then select the fan speed by pressing the SPEED button ( U) until the indicator light corresponding to the required fan speed lights up. MAX:the air conditioning unit operates at maximum to reach the required temperature as rapidly as possibleMED:reduces noise levels but still maintains a good level of comfortMIN:for silent operationAUTO: the appliance automatically selects the most suitablefan speed in relation to the temperature set on the digi- tal displayThe most suitable temperature for the room during the summer varies from 75° - 81° F (24 to 27°C).

You are recommended, however, not to set a temperature excessively lower than the outside temperature.DEHUMIDIFYING????Ideal for reducing humidity in spring and autumn, during rainy spells or in damp rooms. Place the appliance in the room without fitting the air exhaust hose ( 12) and the intake hose ( 19). After selecting dehumidifying mode, the light ( D) comes on. Press the “ +“ ( G) or “ - “ ( P) buttons until the required humidity level is displayed. At the same time, the Auto fan light ( Q) comes on as the appliance auto- matically selects the most appropriate speed. Water is removed from the air and collected in the condensation tank ( 8) at the back of the air conditioner.7850Depending on the model, the temperature on the display is shown in °C or °F. However, the illu- strations in the manual give the values in °F.8.